Blue-white F-462 Polysulfone Molded User Manual download pdf

Your Blue-White F- 462 Series

Your Blue-White flowmeter was designed to be easy to

install.

Please read the Instruction Guideline on the next page

before installing your flowmeter.

This flowmeter is an instrument, special care should be

taken when handling and installing.

Inspection of the Flowmeter and Compatibility

Installation Instructions

09/18/2012

80000-395

F- 462

Blue-White

Industries, Ltd.

Materials of Construction

Meter Body: Polysulfone

Float: PTFE (Based on model)

Adapters: Polysulfone

Float Stop: Polyethylene

Union Nuts: Nylon

O-Rings: Viton

Scale: Permanent, dual scale silkscreen (black ink)

Accuracy: ± 2% of full scale reading

Check for damage while unpacking the flowmeter.

Remove any instruction sheets and shipping materials that may have been

inserted into the meter body for shipping reasons.

Remove the box containing the float. Note the floats position before

removing the float from the meter body (tube). The float must be installed in

the same direction when assembling the flowmeter.

Remove the pipe fitting adapters with o-rings and the union nuts. Note the

proper location of the o-ring in the groove. Be sure the o-ring is properly

seated during installation.

Be sure the meter and the materials of construction are suitable for your

application.

The maximum temperature and pressure is shown on the following pages.

Although the meter may be suitable for use with other fluids, Blue-White

meters are tested with water and air only. If you are not sure that the meter

is compatible with your fluid, consult the factory.

The meter can be damaged by UV light. Do not install the meter in direct

sunlight.

Blue-White guarantees the meter is suitable with air and water only.

18-7/8 in.

(479.4 mm)

4-5/8 in.

(117.5 mm)

Industries, Ltd.

Blue-White

Industries, Ltd.

1 2 3 4

Blue-White 1
Installation Guideline 2

Summary of Contents

Page 1 - Blue-White

®Your Blue-White F- 462 Series®!Your Blue-White flowmeter was designed to be easy to install.!Please read the Instruction Guideline on the next page

Page 2 - Installation Guideline

5133324FloorCeilingCaution: Follow these instructions to avoid failure.Danger: Wear eye protection when installing or removing flowmeter.1. Flowmeter

Page 3

Blue-WhiteIndustries, Ltd.RPressure Temperature and Pressure and temperature limits are inversely proportional. At the maximum suggested pressure the

Page 4

BLUE-WHITE INDUSTRIES LIMITED WARRANTYFLOWMETERS are warranted to be free of defects in material and workmanship for up to 12 months from the date of

Comments to this Manuals

No comments

Blue-white F-462 Polysulfone Molded User Manual

Browse online or download User Manual for Sensors Blue-white F-462 Polysulfone Molded. Blue-White F-462 Polysulfone Molded User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Sensors Blue-white F-462 Polysulfone Molded